Infrastructure

Galvanized CSP boasts a Design Service Life (DSL) of 50 years while Aluminized Steel Type 2 and polymer-laminated coating options can extend DSL to 100 years. A wide range of fittings and couplers are available including Armtec's Huggerband, designed to minimize joint leakage.

BOSS 2000 is also available in 210 kPa pipe stiffness for applications where CSA certification is not required such as driveway culverts. The pipe wall can be factory perforated and fitted with a geotextile sock for subdrain or recharge drain applications. BOSS 2000 can be customized for a variety of applications including greenhouse leachate collection and carbon dioxide control.

Strong and lightweight – 1/50 the weight of the concrete – Aluminum Structural Plate requires minimal equipment for handling and installation.

DuroMaxx pipe is lightweight, allowing for easy handling of long sections without heavy construction equipment, guaranteeing cost savings in manpower and machinery. Armtec is a proud partner of Contech Engineered Solutions – a leading manufacturer of infrastructure products in North America.

Choosing a BRIDGE-PLATE buried soil-steel structures eliminates the bridge deck, approach slabs and expansion joints common in traditional bridge design, significantly reducing maintenance and total life cycle costs.

This Structural Plate Corrugated Steel Pipe (SPCSP) component system is made of specially designed curved and corrugated galvanized steel plates. Structures are easily assembled in the field and installed using light construction equipment.

Bin Wall’s unique design allows it to flex against minor, unforeseen ground movements that might damage or destroy rigid-type walls. Bin Wall structures have been recognized worldwide for over 60 years as economical and effective retaining walls.

Since complex tunnel lining equipment is not required, installation is quick and easy with minimal disruption to road users and the surrounding environment. A variety of material options and coatings are available to optimize service life requirements.

UltraFlo spiral rib CSP is available as a round or a pipe arch shape which is ideal for restricted headroom applications. Ultra Flo can be supplied in galvanized steel, Aluminized Steel Type 2, and with polymer laminate coating for extended service life.

Fast and inexpensive to assemble, Bridge Plank solves the issue of reduced load limits due to inadequate flooring. It has the high strength-to-weight ratio of corrugated steel and reduces repetitive and expensive repairs on the bridge floor by 50%.

A typical Bridge in a Box can be assembled and placed onto the abutments in one day, in all weather conditions, with standard construction equipment. Bridge in a Box offers ease of installation and efficient transportation, generating substantial cost savings.

Easily recognized, SteelCor CSP Culvert Markers help towns and municipalities save costs on expensive repairs and replacements on damaged utilities and culverts. For recreational snowmobilers and ATV operators, the SteelCor Culvert Markers ideally serve as safety devices warning of obstacles to avoid against serious accidents and injury.

Ditch Liner is a versatile product, available in a 68 x 13mm corrugation profile and four steel thicknesses up to 3.5mm. Spans range from 300 to 1600mm.

Geosynthetics offer low upfront cost and dependable performance making them a cost-effective solution in soil engineering. They are available in a wide range of weights and strengths to suit design requirements and site conditions.

Applications include highways, bridges and parking lots. Installation is straightforward and when repairs are required, only damaged rail or posts need to be replaced. Armtec Guardrail meets AASHTO designation M180.

Steel sheeting is attractive, quickly installed, and economical. Although lightweight, its unique profile gives it a high degree of stiffness and an exceptional strength-to-weight ratio.

Beaver Stop is suspended to allow water to pass freely through the culvert without impeding the passage of fish or harming the beavers. Beaver Stop protects all areas of the culvert, including the outlet, inlet, and the middle.

Easy to install, Flow Guard fits any pipe type, it is low maintenance and provides years of protection. The knock-down design feature allows for large and small diameter devices to be shipped economically and to be installed with ease.

Slotted drains resist freeze/thaw cycles and their easy maintenance make it perfect for installations with no slope, steep slope or pipes with shallow burial. This drainage product is perfect for highway medians, airport, parking lots, sport stadiums, or where curbs are undesirable. Slotted Drain is approved by most provincial Transportation Departments and Ministries across Canada, as it provides an aesthetic and efficient option for storm drainage.

Armtec sign posts are manufactured from 4.2 mm (8 gauge) galvanized steel and their structural quality conforms to ASTM A1011 standard. The profile stiffness resists bending and twisting forces while reducing vibration and bolt loosening.

A variety of flow control accessories are available to enhance performance without sacrificing appearance. These include pre-fabricated trash racks, security grids and handrails, bolt-on scour aprons, pre-fabricated weir boards and frames, and pre-installed flap gates and slide gates.

Sections of both types can be nested, allowing efficient and economical transportation for long-haul distances, remote sites, or international destinations. This product is especially useful for installations around existing utility lines, under buildings, and as an economical concrete form.